Category
Cellular IoT RTU-GSM SMS 3G 4G RTU
GSM GPRS 3G 4G IoT M2M Modem
GSM SMS GPRS 3G 4G Data Logger
GSM 3G 4G Gate Opener Intercom
GSM 3G 4G Power Mesuring RTU
GSM SMS GPRS RTU Controllers
GSM 3G 4G Monitoring Alarm
Industrial Detector Transducers
Industrial Ethernet Remote IO Module
Modbus RTU Remote IO Modules
CANOpen DeviceNet IO Modules
GSM Home Security Alarm
Certificate Download (CE/FCC/RoHS/SGS)
Cellular IoT Cloud Platforms
GPRS 3G 4G Wireless IoT module
 
 
 
 
 
 
 
 
 
 
 
Product List Current position:Home >> GSM SMS GPRS RTU Controllers >> GPRS Remote Controller(10AIN/6DIN/4Dout/1RS485)
 

Larger view

 
Name:GPRS Remote Controller(10AIN/6DIN/4Dout/1RS485)
Model:S240
The King Pigeon S2XX Serial GSM/GPRS Remote Controller equipped Siemens MC55i quad-band GSM Module inside to make it is industrial class reliability, is a low cost, wireless M2M, wireless data logger, universal GSM GPRS Engine which can remote control outputs, transmit and receive analog, digital and pulse counter data, PLC, Varity metering equipments to any device connected to the Wireless GSM GP
Introduction
Features
Specifications
Download
Packing List

New Updates: Users can log in to the Microthings.co web application for remote monitoring there S200, S220, S240 GPRS Data Logger remotely, July 10, 2015.

New Updates: Users can download the KingView SCADA demo version and related documents for remote monitoring there S200, S220, S240 GPRS Data Logger remotely, Feb 10, 2015.

Model Table

Model

AIN

DIN

DOUT

Temp.

USB

RS232

RS485

S200

4

2

2

2

1

0

1

S220

6

6

4

2

1

0

1

S240

10

6

4

2

1

0

1

**The S200,S220,S240 support to upgrade the firmware by USB on site by end-users, no need to return the hardware to our factory if you need more special functions or want to use the latest version firmware.

**The user can remotely real-time monitoring the GSM GPRS Remote Controller by GPRS remotely via the PC Configurator.

The King Pigeon S2XX Serial GSM GPRS Remote Controller is a universal GSM dialer and controller as well as a GSM GPRS Remote Control and Alarm Unit. it provides multi digital relay outputs(120VAC/3A, 24VDC 3A,), upto 6 digital inputs(Opto-isolated,Active Contact, 3~24VDC, Completely isolated).can be used as pulse counter inputs), 2 temperature inputs for DS18B20, multi analog input(both of 0-20mA and 0-5V, 12 bit resolution), RS485 Port(Support Modbus RTU Protocol, more protocols can be added according to application requirements), reserved RS232 Serial Port and USB port for setting and download upgraded firmware by user on-site. It allows you to monitor and control an alarm or remote stations or equipments or machines by SMS(Short Message Service) Or GPRS. Another, it can transmit data from apparatus (thermometer, humidity meter, electric meter, flowmeter, PLC) to user or monitoring center by GPRS.

 

The King Pigeon S2XX Serial GSM/GPRS Remote Controller equipped Siemens MC55i quad-band GSM Module inside to make it is industrial class reliability, is a low cost, wireless M2M, wireless data logger, universal GSM GPRS Engine which can remote control outputs, transmit and receive analog, digital and pulse counter data, PLC, Varity metering equipments to any device connected to the Wireless GSM GPRS network such as mobile phones, Web Sites, monitoring center, control room, SCADA, etc.

The GSM GPRS Remote Controller S2XX can be used as:

  • A Switch with SMS Remote Control. SMS texts for switching particular terminals on/off are configurable.
  • A Timer-Switch which can be activated automatically. It can be used as preset time when the GSM GPRS Remote Controller need work and when it needn‘t work. 4 daily timer and 7 Weekly Timers.
  • A Relay with dialling-in remote control. Up to 4 tel. numbers can be authorized for it. Because calls are not answered dialling-in control within GSM is free of charge. (it only checks the caller’s number and - if the number is authorized - responds with relay activation.) This can be used for parking latch control, gsm gate opener, remote control machine, etc.
  • An automation system. Each input can link to output actions, this is very useful when the temperature upto appointed value, need switch on the air-conditioning immediately, or when water overflow and need switch on the dryer, or when somebody broken into the door or windows need to start the CCTV and Siren.
  • A SMS reporter. The digital Inputs activations or deactivations can be reported by SMS and optionally confirmed by phone calls. Each input can have its own message texts and the message can be programmed by users.
  • A Pulse Counter. The digital inputs can be used as the pulse counter, the user can setup both of interval value activated alarm and total value activated alarm.
  • A Data Logger. The unit can save the all of the acquisition data in internal memory storage and upload to internet by GPRS network according to schedue, no distance limitation.
  • A Wireless Data Acquisition to SCADA or HMI or Monitoring Center. The unit can acquisition the varity data(E.g.: Pressure, Level, Current, Voltage, digital input status, pulse counter, digital relay output status, temperature value, humidity value and other) and upload to the SCADA(Real time dynamic data) or HMI or Mornitoring Center by SMS or GPRS, no distance limitation.
  • A Wireless Intelligent Meter Reader. The GSM GPRS Remote Controller can be used to read remotely intelligent meter data to SCADA or monitoring center by RS232 port or RS485 Port, at present supports ABB,KL,HHE intelligent meters by RS485, more special meters’ communication protocol can be add according to application requirements.
  • A GSM GPRS Remote Termials (GSM GPRS Remote Controller). It can work with the supervisioning center, in the supervisioning center, the own can remote monitoring and control the remotely terminals by GSM GPRS Network.This is very useful to Fuel tank monitoring, Oxygen in hospital, Flood level, street light control, wellhead control, BTS environment monitoring, power transmission system monitoring and other applications.
  • What Applications does the GSM GPRS Remote Controller suitable for?

    1. Security Alarm System applications;

    2. Supervision and monitoring alarm systems

    3. Automatic monitoring system;

    4. Vending Machines;

    5. Pumping Stations;

    6. Buildings and Real Estate;

    7. Weather Stations remote control and data logging;

    8. River Monitoring and Flood Control remote control and data logging;

    9. Oil and gas pipelines remote control and data logging;

    10. Corrosion protection

    11. Valve controls;

    12. Wellheads;

    13. Energy saving,street lights control system;

    14. Tanks, levels, temperatures,water leakage applications;

    15. Transformer stations;

    16. Unmanned machine rooms;

    17. Control room application;

    18. PLC and Automation System, M2M;

    19. GSM Access Control System, GSM Gate Opener, etc.

  • Monitoring Center or OPC Server or SCADA or HMI:

    The GSM GPRS Remote Controller supports GPRS Communication, it is useful to create the monitoring center,HMI and SCADA at reliable and low cost.

    The user can according to the abovementioned SMS Commands List and formart to create special monitoring cetner and OPC server or other applications.

    Also, we provided the Kingview SCADA and its OPC server to users, it can save time and cost to the implementation of varity applications. From the SCADA, the user can remotely monitoring a large quantity of remote equipments and intelligent meters. All the operations are dynamic. See below:

    More about the SCADA and how to setup the SCADA please read the SCADA Setup for GSM GPRS Remote Controller Instructions.

    In this user manual, we introduce the basic knowledge of the monitoring center types and how does them work.

    1.    Directly to SCADA System

    If the users want to log data to its present SCADA system directly, the user must develop the GSM/GPRS Driver then install in its present SCADA according to our communication protocols.

    2.   Monitoring by SCADA System through OPC Server

    If the users want to log data to its present SCADA system through OPC Server, the user must develop the GSM/GPRS Driver then install in its present OPC Server according to our communication protocols, so that the OPC Clients can access the GSM/GPRS RTU through OPC Server.

    3.   By customer customization monitoring center

    If the users want to log data to its customization monitoring center, the user must develop the GSM/GPRS Driver then install in its monitoring center software according to our communication protocols.

    4.   By Mobile phone through SMS.

    The GSM/GPRS RTU can send the reports and events by SMS to 1 SMS Center number and 6 user numbers.

 
 
Copyright ©2008- King Pigeon Hi-Tech.Co.,Ltd. All Rights Reserved
Address: 5/F,Building F,Yusheng Industrial Park,Jiuwei,Xixiang,Bao'an District,Shenzhen,518126,China.
TEL: 0086-755-2906 3895 Ext:804 806 809