How
to install the USB driver for King Pigeon Products
>> This instruction suitble for King Pigeon A10,S130~S150,S200~S240,S250,S260~S264,RTU5025 GPRS/3G Gate Opener,etc. for explain how to install the USB driver on your computer for the devices. The
purpose is actually----How to find out the COM port number for the
PC programming software.
>>> The USB driver and the programming software for above mentioned
models can work with WindowsXP, Windows7, Windows8 OS.
>>> In some cases the USB driver may not working good even you did the
all process correctly---please find another
PC for test again, better is change the OS version, for example, from WinXP SP2
to WinXP SP3.
>>> As an example, we connect the S260 to computer by USB cable,and the
steps as below:
1.
Connect the S260 to computer by
USB cable.
2.
Normally the computer will show
installation automatically, as below:
3. You can find the COM port on “Computer---Property--Device
Manager---Ports(COM & LPT)”---WinXP,
or “Control
Panel---System and Security---System---Device Manager---Ports(COM & LPT)”.---Win7/8.
The name of the S260 device’s usb port is “Silicon Labs
CP210x….” or similar with “CP210x…”, the COM port number (like COM3 as example)
on the end of this item.
4. Then you can open the S260’s PC
software, select the COM port (COM3 on example), and then enter to working
mode.
5. If the COM port can’t showing
on "Device manager"---Showing the Unknown device:
6. Please download the USB driver
on Silabs.com:
http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
or search “CP210x”
on Google to find out the usb driver, download to your computer, unzip it to a folder.
7.Then following the steps one by
one:
The same process for S130 and A10,S200,etc.
Do note that for the S130 you will need to
turn the debug switch which closed to the SIM card holder to “SET” postion
before connect the USB to PC. And then return it to “WORK” position after
setting complete.
-------------------The
End------------------
|